Osram coordinating project for developing high-brilliance infrared laser sources
The goal: increase performance and lower costs of laser systems for materials processing
Sunnyvale, CA, February 21, 2013 -- In order to help improve the performance of laser systems while reducing production costs, Osram Opto Semiconductors is coordinating the IMOTHEB project (Integrated microoptical and microthermal elements for diode lasers of high brilliance) as part of the “Integrated Microphotonics” initiative. The project partners are DILAS Diode Laser and the Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy (MBI), a nonprofit research organization. The project runs from October 1, 2012 to September 30, 2015 and is being supported by the German Federal Ministry for Education and Research (BMBF).
Diode-pumped high-power laser systems for materials processing applications such as cutting and welding are playing an increasingly important role in industry. Their advantages over carbon dioxide lasers and lasers pumped with flash lamps include lower operating costs, greater efficiency and smaller size. Fiber lasers and fiber-coupled diode lasers are becoming more and more important for optical materials processing. As the lasers become more widespread, the focus is shifting to the issue of cost. Developments that increase the performance of laser systems, and at the same time reduce production costs, are necessary to move this market forward. Infrared semiconductor laser diodes that can be used to pump fiber lasers are key components in this area. They offer enormous potential for automating production and miniaturizing the systems while reducing the number of semiconductor chips needed thanks to the increased performance they provide.
The objective of the IMOTHEB project is to investigate new approaches and technologies that may ultimately lead to significant reductions in the cost of the pump modules, including the semiconductor lasers and also the cooling elements, optics and sensors. There are also plans over the course of the project to increase the output of semiconductor lasers by 40 percent while retaining the same high beam quality. IMOTHEB maps the entire value-added chain from the semiconductor chip to the complete laser system. The project partners bring their own specific areas of expertise:
• Osram Opto Semiconductors is coordinating the project and offering its know-how in semiconductors, laser diodes and laser bars; simulations are being subcontracted to the Fraunhofer Institute for Applied Optics and Precision Engineering.
• DILAS is responsible for the assembly technology with improved thermal resistance and higher integration in laser modules, as well as for automation in module production.
• The Max Born Institute is acting as a scientific partner, analyzing and characterizing the chips and modules.
Osram Opto Semiconductors has set the goal of achieving a higher degree of integration at the semiconductor level, increasing the brilliance of infrared laser diodes by integrating micro-optical and microthermal elements directly on the chip. Over the course of the project, the target is to increase output by 40 percent compared with current best values while retaining the same high emission quality. If these high outputs are achieved, they will make laser chips ideal for fiber laser pump modules and for fiber-coupled diode lasers. Dr. Alexander Bachmann, project leader at Osram, said: “We need results that bring not only technical but also economic benefits to strengthen our competitive position. Based on results from the project, our brilliant laser diodes should provide more output into the fibers so that fewer chips are needed in the system and the laser systems therefore become more efficient and more cost-effective.”
Prototype of a high-power laser bar, as developed by Osram Opto Semiconductors in the IMOTHEB project.
Higher output from laser diodes and new automated assembly processes for laser systems are targeted at industrial applications such as laser welding and laser cutting, making them more efficient and more cost-effective.
About Osram Opto Semiconductors
OSRAM GmbH of Munich, Germany is one of the two leading light manufacturers in the world. Its subsidiary, OSRAM Opto Semiconductors GmbH in Regensburg (Germany), offers its customers solutions based on semiconductor technology for lighting, sensor and visualization applications. Osram Opto Semiconductors has production sites in Regensburg (Germany) and Penang (Malaysia). Its headquarters for North America is in Sunnyvale (USA), and for Asia in Hong Kong. Osram Opto Semiconductors also has sales offices throughout the world. For more information go to www.osram-os.com.
OSRAM Opto Semiconductors