Swissbit presents industrial eMMC EM-20 - Reliable Boot Medium for Embedded Applications

Bronschhofen, Switzerland. June 1, 2017 - Swissbit, a leading manufacturer of flash memory solutions, presents its latest technology for the industrial market: the embedded Multimedia card EM-20. The eMMC combines an industrial controller with reliable multi-level cell (MLC) flash in a BGA153 package making it possible to solder the memory directly onto the printed circuit board of the target application. With capacities from 8 to 64 GB, all typical applications are covered. EM-20 replaces thus far commonly used NAND memory chips, which depend on elaborate operating system resources. Thanks to its integrated controller, flash management functionality and standardized interface, EM-20 can be easily designed-in to applications and offers a variety of key features. The firmware is designed for use as a streamlined and energy-saving boot medium for medical devices, POS/POI terminals or demanding industrial embedded computing applications. As a further distinctive feature, Swissbit's EM-20 can be optionally operated in reliable / pseudo-SLC mode (pSLC).

New Memory-Solutions from Swissbit: the embedded Multimedia Card EM-20
New Memory-Solutions from Swissbit: the embedded Multimedia Card EM-20

Bronschhofen, Switzerland. June 1, 2017 – Swissbit, a leading manufacturer of flash memory solutions, presents its latest technology for the market: the embedded Multimedia card EM-20. The eMMC combines an industrial controller with reliable multi-level cell (MLC) flash in a BGA153 package making it possible to solder the memory directly onto the printed circuit board of the target application. With capacities from 8 to 64 GB, all typical applications are covered. EM-20 replaces thus far commonly used NAND memory chips, which depend on elaborate operating system resources. Thanks to its integrated controller, flash management functionality and standardized interface, EM-20 can be easily designed-in to applications and offers a variety of key features. The firmware is designed for use as a streamlined and energy-saving boot medium for medical devices, POS/POI terminals or demanding industrial embedded computing applications. As a further distinctive feature, Swissbit's EM-20 can be optionally operated in reliable / pseudo-SLC mode (pSLC).

pSLC (pseudo Single Level Cell) stores only one bit per MLC cell. For certain applications, the pSLC mode offers advantages: it is significantly faster than the standard use of multi-level cell flash technology and at the same time it increases the possible P/E cycles (program/erase cycles) from 3,000 to 20,000. Under the same conditions, the endurance of the data carriers increases by a factor of 6.7. The user can flexibly configure and choose between pSLC or MLC mode, even separately for different partitions if required.

Industrial temperature range

EM-20 memory cards are based on JEDEC 5.0 - the de facto standard for industrial eMMCs. They are available with capacities of 8, 16, 32, or 64 GB and offer the most advanced firmware features such as page-based flash management, wear levelling, read disturb management, data care management and secure data erasure. The Replay Protected Memory Block (RPMB), a one-time writable partition, makes key- for Trusted Execution Environments possible. With data-refresh-functionalities and an industrial operating temperature range from -40 °C to +85 °C, the data carrier is designed for long-term operation under harsh conditions. Swissbit’s eMMC offers highest performance with up to 270 MB/s for reading and 160 MB/s for writing.

Topics covered in this article