TRUMPower's Releases Medically Approved 500W Intel(r) Haswell(tm) Ready ATX PC Power Supply

Santa Clara, California, USA –TRUMPower announces the medically approved 500W TMPC-500H, passing rigorous testing for compatibility with the Haswell™ processor platform.

Compared to the prior generation Ivy Bridge™ platform, the Haswell™ platform substantially cuts the minimum sleep power consumption by one order of magnitude from 6W to 0.6W. Incompatible power supplies may require a hard reset when there is a substantial load on the non-primary rails (+3.3V and +5V) causing the +12V to go out of specification during the C6 and C7 sleep states. If the +12V is out of specification when the system comes out of its sleep state, the unit’s protection may prevent it from functioning normally. However, the TMPC-500H fully supports these C6 and C7 power saving sleep states which reduce the CPU power consumption to 0.05A without triggering the under-voltage protection and without forcing the system to reset.

With its 90-264 VAC universal input and active PFC, the Haswell™ ready TMPC-500H can be used worldwide without the necessity of changing input settings. Its 87% to 90% efficiency meets 80 Plus Gold standard. The power supply is approved to ANSI/AMMI ES 60601-1: 2005, CSA C22.2 No. 60601-1:08 and IEC/EN 60601-1 3rd edition standards by UL and TUV. It complies with IEC/EN 60601-1-2 EMC and immunity standards, including EN 55011, EN 55022, FCC & VCCI Class B conducted and radiated EMI, EN 61000-3-2/3, and EN 61000-4-2/3/4/5/6/8/11. The BF rated power supply provides 2 MOPP between input and output, and 1 MOPP between input and ground. Earth leakage current is 150µA @ 264 VAC, 63 Hz.

Meeting ATX12V standards, the TMPC-500H comes with DC voltage outputs and maximum loads of +3.3V/24A, +5V/20A, triple +12V/16A, -12V/0.5A, +5Vsb/3A, -5V/0.2A respectively. The maximum total output is 500W, with the combined output of +3.3V and +5V limited to 130W, and the combined triple +12V offering a maximum current of 38A. The power supply includes a standard output cable set that can meet the requirements of most applications. Any other special requirements of the cable set can be fulfilled as well.

The TMPC-500H has a built-in, thermally controlled ball-bearing fan with noise-killer. Other key features include short-circuit protection, overvoltage protection, overcurrent protection, over-temperature protection, low ripple and noise, 0ºC to 50ºC operating temperature, and 5,000 meters maximum operating altitude.

For detailed information on the TMPC-500H, please visit www.trumpower.com/library/tmpc-500h.pdf or email sales@trumpower.com.

TRUMPower has been delivering excellent quality medical and commercial grade AC/DC switching power supplies and DC/DC converters since 1991. The company’s medical grade power supplies range from 4W to 1200W in wall mount, desktop, open frame, and ATX PC form factors. TRUMPower can accommodate to OEM’s needs, whether they are low volume or high volume power supplies, by providing prompt responses and cost-effective power solutions. As a result, it has gained a substantial number of satisfied customers over the years and continues to do so.

For more information on the company and its other products, visit www.trumpower.com or email us at wsales@TRUMPower.com

Topics covered in this article