Cmod A7 Breadboardable Artix-7 FPGA Module

Digilent Inc.

Flag/report this product
The Digilent Cmod A7 is perfect for rapid prototyping. The small, breadboard friendly 48-pin DIP form factor makes it easy to embed into a small project. It is built around a Xilinx Artix-7 FPGA. We offer two flavors - Cmod A7-15T and Cmod A7-35T. The only difference between the Cmod A7-15T and Cmod A7-35T is the capabilities of the FPGA found on the board. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit
Cmod A7 Breadboardable Artix-7 FPGA Module
click graphic to zoom by 3.2x

FEATURES

  • XC7A15T-1CPG236C for A15T / XC7A35T-1CPG236C for A35
  • 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
  • USB-JTAG Programming Circuitry
  • USB-UART bridge
  • One Pmod connector with 8 Digital I/O
  • Powered from USB or external 3.3-5.5V supply connected to DIP pins
  • GPIO: 2 LEDs, 1 RGB LED, 2 Push Buttons
  • 512KB SRAM with an 8-bit bus and 8ns access times
  • 4MB Quad-SPI Flash

See also:

Go Back

Flag/report this product